SilentCall SK2-SS Sidekick II Signature Series, Руководство пользователя

Страница: 10 / 12

10
Each Smoke Detector or Fire alarm transmitter must be assigned an address different from all other
transmitters. For example, if two smoke detectors and one fire alarm transmitters are being used, they
may be assigned address #1 (1 OFF and 2, 3, 4, 5 ON); address #2 (1 ON, 2 OFF, 3, 4, 5 ON); address
#3 (1, 2 ON, 3 OFF, 4, 5 ON).
Once programmed for the Smoke Detectors and Fire alarm transmitters, the receiver automatically as-
signs each transmitter a location on one of the three RED LED’s located on the Front Panel, right side.
The red LED located furthest left of the three is assigned the first Smoke Detector or Fire alarm program.
The second Red LED, the second Smoke Detector or Fire alarm programmed and the third Red LED, the
third Smoke Detector or Fire alarm programmed. Once installed and operating correctly, the transmit-
ters can be identified by location. For Example, a smoke alarm on LED # 1 may represent the bedroom,
a smoke alarm on LED # 2 may be located in the basement and a smoke alarm on the LED # 3 may be
located in the garage.
Low battery notification:
The Silent Call Signature Series Transmitters, operates on two AA batteries and has a built in low battery
sensor. The transmitters will send out a special low battery signal whenever the low battery condition
exists.
When the Sidekick II Signature Series Receiver detects the signal it will display the condition by turn-
ing on the units ALARM LED and displaying the ALARM ICON along with the CHK ICON. For
example, a smoke detector battery is low. The smoke detector or fire alarm transmitter sends a signal to
the Sidekick II Signature Series Receiver about its battery condition. The receiver will display the FIRE
ICON, the CHK ICON, and turn on the FIRE LED. The unit will not turn on the Strobe or Vibrator. The
display will continue to show the low battery condition until the problem is resolved. Once resolved, the
transmitter will no longer send the low battery alarm.
Technical Support
For technical support on this or any other Silent Call product, please feel free to contact us. You can
reach us by phone at 800-572-5227 (voice or TTY) or by Email at support@silentcall.com
Limited Warranty
Your Silent Call product is warranted to be free of defects in material and workmanship for five years
from the date of initial purchase. During that time, the unit will be repaired or replaced free of charge
when shipped prepaid to Silent Call Communications. This warranty is void if the defect is caused by
customer abuse or neglect. We honor the smoke detector manufacturer’s warranty for their smoke detec-
tor. Only Silent Call products are warranted for 5 years.