Document 920.0090 Rev 3.00 April 16, 2002
6
Installation
The V25 Camera is designed to be flush mounted on a panel or in a standard deep
double-gang electrical box. The camera can be located indoors or outdoors, on a
wall or ceiling, in accordance with the current Electrical Code or any national wiring
rules that apply.
Follow the
Initial Setup
procedure before installing the V25 Camera.
Mounting the Camera on a Wall or Ceiling
To mount the V25 Camera on a wall or ceiling panel:
1.
Mark and drill out mounting holes in the wall or ceiling panel (see
Figure 4
),
using the mounting template shown on
page 21
.
2.
Insert the camera base into the mounting hole.
3.
Secure the camera to the mounting panel using four #6-32 self-tapping screws
(not provided).
Note
An optional V25 Backing Plate Kit is available to mount the V25
Camera in a removable ceiling panel as shown in
Figure 4
. Please
contact Silent Witness Sales for more information.
Figure 4
Wall/Ceiling Mount Installation
Backing plate
(optional)
Mounting panel
Video output
Power input
V25 base
#6-32 mounting
screws (x4)
