Silent Witness SW011, Руководство пользователя, Страница: 3 / 15

•
The product should be disconnected quickly, via the power cable, from the vehicle if the
unit produces abnormal smoke or burning smell.
•
If you install this product in a place where the surrounding humidity is high, it can be the cause
of breakdown. If this product is not well ventilated i.e. being covered with something, it may
cause discolouration, deformation and breakdown due to over-heating.
•
Please always ensure the power cable and other accessories are fi rmly connected and the cabling
is neatly stored.
•
Whilst driving through a tunnel, where tunnel lighting is too bright or too dim, the recording
quality of the video can be degraded.
•
If this product is damaged because of accident or impact and power supply is cut o ff , the video
recording can be stopped.
•
If there are foreign substances on the lens or excessive window tinting, the recorded image can
be blurred, distorted or appear dark.
•
Please be careful when this product is exposed to direct sunlight and turned on for a long time,
as the camera may become hot.
•
We recommend this product to be installed by one of our recommended professional installers.
•
Please note that the user has a liability for the recorded and stored image/sound data in
accordance with Personal Data Protection Act and related law (statute).
•
Please use the authentic Silent Witness product/parts that we provide. We will not be held
responsible for the breakdowns and accidents caused by the use of non-authentic Silent Witness
products/parts.
•
Do not drop the product. -It may cause damage or malfunction not covered by warranty.
•
Do not place near magnets. -It may cause the device to malfunction or operate erratically.
•
Keep the unit away from other GPS devices. - It may cause interference of the GPS signal rate.
•
GPS function requires loading time when fi rst powered on. - It can take up to a few minutes for
the device to lock on to satellite signal.
•
Metallic tinting and heated front windscreens can cause interruption in the GPS signal. - If you
vehicle has this then please experiment mounting the camera in di
ff erent positions.
•
Sudden changes of brightness such as entering or exiting a tunnel or extremely dark place may
cause a temporary loss in video quality.
•
The front glass - camera lens should be kept clean. - If it is dirty, recording image quality may be
low.
•
Attach the product in the recommended place. - If it is installed in an obscure place, the image
may be skewed.
WARNING
•
Do not place near e ff ective range of an air bag. - It may cause malfunction of air bag or accident.
•
Keep the power socket clean of dust. -A poor connection will result in malfunction.
•
Install with the power o ff . (After installation, connect DC jack) - It may cause electric shock or
malfunction.
•
Do not operate the product whilst driving. - It may cause an accident. Stop in a safe place to
operate.
•
Do not pull the power cable, remove by holding the plug and pull. Do not use a damaged cable. -
It may cause cable malfunction, electric shock and
fi re.
•
Do not clean exterior with alcohol, volatile or oily solvents. - It may cause deformation of the
surface and malfunction.
•
Attach the product on the front window fi rmly. - Clean the front window and fi x it fi rmly,
otherwise it may be detached due to temperature / humidity / dust / shock.
Page 3