Document 900.0155 Rev 1.02
5
6
Install the conduit plug in the conduit entry on the back.
7
Apply an appropriate sealant around the conduit connection.
Figure 2
Installation
Brass screw-in
Retaining ring
Cable grommet
Side conduit entry
Back conduit entry
Dome and turret insert
dowels (x2)
Disconnect the 12 VDC
power cable before
using a different conduit
entry.
Disconnect the coaxial
video cable before using a
different conduit entry.
Rubber lens boot
must fit snug against
inner dome surface
(
see ”Step Four: Se-
cure the Cover” on
page 6
).