SILENT KNIGHT IFP-2000, Инструкция по установке и эксплуатации

Страница: 205 / 238

Testing and Troubleshooting
151430 12-3
12.2.2 Event History
The event history can be useful for tracking or recalling a trouble condition.
12.3 Built-in Troubleshooting and Testing Tools
The fire control panel has several built-in testing and troubleshooting tools that can be utilized
to save time while testing and troubleshooting points and SLC devices.
12.3.1 SLC Device Locator
SLC device locator can be used to locate a device on a SLC loop.
Follow these steps to locate a particular SLC device:
1. Select (Point Functions) from the Main Menu.
2. Select (SLC Single Device Locator).
A message similar to the one shown in Figure 12-1 will display.
Figure 12-1 Shut Down Warning
3. Press the or arrow to toggle
NO
to
YES
then press .
If
NO
is chosen you will exit back to the Point Function menu.
If Yes is chosen the system will cease normal operation leaving the premise unprotected.
4. Select the SLC loop.
5. Enter the SLC address of the device you wish to locate.
The LED on the selected device will start flashing.
6. Press any key to exit SLC device locator function.
Note: Once you exit the system will resume normal operation.
2
4