UM_FULL_53SL_REV_A
6
WARNINGS
As with any product that performs automatic functions, there are certain safety precautions
that you must practice and be aware of.
1.
Keep the transmitter out of children’s reach.
2.
Do not leave anyone in the vehicle while running on remote control.
3.
Alert servicing personnel that the vehicle can be started automatically.
4.
Do not start the vehicle by remote while it’s in an enclosed area or garage.
5.
Always apply the parking brake and lock the vehicle as you exit the vehicle.
6.
The vehicle windows must be rolled up.
7.
Should the unit malfunction, disconnect the fuse until the problem is corrected.
8.
The use and operation of this system is the sole responsibility of the operator.
9.
Some areas may have local ordinances that prohibit leaving a vehicle running on public streets.
10.
It is not safe to remote start the vehicle if the vehicle is parked on a steep incline.
REMOTE START OPERATION
A. To Remote Start The Vehicle
When you want to start your vehicle:
1.
Press the
button once on the
4
-button transmitter or press and hold the
/
button for
1.5 seconds on the
2
-button transmitter.
2. The parking light will activate to indicate the remote start has received the signal.
3. The engine will start in approximately 5 seconds
4. After a couple of seconds with the engine running the parking lights will turn on.
5. The vehicle will run for a programmable 3 to 45 minutes cycle (set installation center.) before shutting down.
(See feature bank 2-04 setting)
6. The vehicle refused to start running after 3 unsucce
ssful attempts.
B. Programmable Safety Start
(For 4-button transmitter only
)
By default, your Silencer remote starter is programmed to start/stop after pressing the
button 1 time.
This default setting can be re-programmed to require 2 presses
-
.
This setting is known as “
Child Safety Mode
”.
Contact your installer to reprogram this feature if needed.
