UM-FULL-30SL rev A
7
SECOND VEHICLE SECURITY OPERATION
Your 4-button remote transmitter can be utilized to control a second vehicle’s security system. To program the remote
control transmitter to a second vehicle, follow the instructions for Transmitter Programming.
Standard Transmitter
Prior to pushing any button on the transmitter. Press the and
buttons together on the transmitter.
Once the and
buttons are pressed, the LED on the transmitter will illuminate for 3 seconds to indicate
the second transmitter pin code has built-in.
While the LED is illuminated, press any button on the remote control transmitter to control a second vehicle
security system.
.
SHOCK SENSOR ADJUSTMENT
1. Turn the Ignition switch
“ON/OFF”
3
times and stay in the
“OFF”
position.
2. Push the Valet switch
5
times holding in on the
5th
push until a long chirp is heard. Then release the valet switch.
You are now in the Alarm feature ‘Shock Sensor’ programming mode.
3. Press and hold the button for 2 seconds. One long siren or horn chirp to indicate the unit is ready to accept
adjustments of the shock sensor.
4. Press the button on the transmitter once. This will
decrease
the sensitivity level by one step. Each time the button
is pushed, a decrease is made and the siren /horn chirp will respond with [1] chirp, while 2 chirps indicates the shock
sensor is
“OFF”
.
5. Press the button on the transmitter once. This will
increase
sensitivity level by one step. Each time an increase is
made the siren/horn chirp will respond with [1] chirp, while 2 chirp indicates maximum sensitivity.
6. Hit the bumper or strong metal part of the vehicle to test the threshold level of the sensor.
a). Activate the warn-away (first stage of the shock sensor), the siren or horn will emit a short chirp.
b). Activate the full alarm (second stage of the shock sensor), the siren or horn will emit a long chirp.
7. When you are satisfied with the setting, press the button to lock in the adjustment. One long siren or
horn or horn chirp will indicate the unit has locked in the adjustment.
Note:
If 30 seconds of inactivity expires, or you turn on the ignition during of above steps, the unit will exit the program
mode and return to the disarmed mode. Three long chirps will confirm exit.
