SILENCE SCUTUM S02, Руководство пользователя

Страница: 48 / 57

48
4. INCORRECT OPERATION MESSAGES
Problem Cause Solution
Front lights are not working. The component is defective or connectors are damaged.
Damaged fuses
Check connectors and replace fuses. If the problem
persists, contact closest authorized dealer.
Back lights or breaking lights do not work. The component is defective or connectors are damaged.
Damaged fuses
Check connectors and replace fuses. If the problem
persists, contact closest authorized dealer.
Scooter does not speed up. Throttle is not adjusted properly.
Check the connection between the throttle and electrical
installation.
Contact closest authorized dealer.
Scooter does not start. Key not inserted. Scooter is charging. Battery is
discharged.
Damaged fuses.
Check if the key is inserted in the groove. Wait until
charging is finished and unplug charger. Charge battery
completely. Replace damaged fuses. If the problem
persists, contact closest authorized dealer.
Battery is not charging, battery percentage
does not increase.
Problem in the battery, problem in the charger.
No electricity in the charger.
Check charger-battery and battery-electrical installation
connections. Check connection of the charger to electric
network.
Breaks do not break properly.
Leakage in the brakes / Low level of fluid in the circuit.
Worn pads.
Check fluid level is correct in tanks. Contact closest
authorized dealer.
Scooter is unstable.
Air pressure is incorrect.
Pneumatics are worn. Compartments are loaded
excessively.
Air pressure must be checked and brought to the
correct level; front 1.5 bar, rear 2.5 bar. Replace the
tires.
Check if the load is excessive. Drive without load.
Error in the status of charge level.
Charge indicator is not synchronized with the actual
status of charge.
Discharge the scooter until green OK LED blinks 7
times and then charge it completely. Go to the dealer if
the problem persists.
Any other problem Depends on the problem Contact closest authorized dealer.