Now it will be possible to use the key to write the numerical value of the four digits in the EKA
code, as shown below:
2) Enter the FIRST digit in the code.
If the first digit is 5, turn the key five times to take it to the “UNLOCK”
position. Make sure the key returns to the exact central position after each
turn.
3) Enter the SECOND digit in the code.
If the second digit is 2, turn the key twice to take it to the “LOCK” position.
Make sure the key returns to the exact central position after each turn.
4) Enter the THIRD digit in the code.
If the third digit is 6, turn the key six times to take it to the “UNLOCK”
position. Make sure the key returns to the exact central position after each
turn.
5) Enter the FOURTH digit in the code.
If the fourth digit is 1, turn the key once to take it to the “LOCK” position.
Make sure the key returns to the exact central position.
6) Finally, take the key to the “UNLOCK” position again: in this way the
motor immobilizer is disabled for one start.
If the code is entered wrongly three consecutive times, you must wait 10 minutes before
repeating the procedure.
IMMOBILIZER FUNCTIONS MENU
From the main menu select: REMOTE CONTROLS
Ö
ROVER
Ö
MODEL
Insert a key
and turn on
the control panel
(ESC)
Insert a key into the ignition block and turn to the ON position.
- Press
ENTER to
continue;
- Press
ESC
to return to the previous menu.
The display will show:
- ROVER -
>
PROGRAMME RKE
EKA CODE
×Ø
(ESC)
-
Select and press
ENTER.
5
