SMART
Remote Programmer
English
5
Copyright Silca S.p.A 2017
OPERATING GUIDE SOFTWARE FEATURES
WARNINGS
1 - FOR PROPER AND RELIABLE OPERATION, KEEP THE SMART REMOTE PROGRAMMER AWAY FROM ANY
SOURCES OF RADIO INTERFERENCE, SUCH AS:
- CORDLESS PHONES
- ELECTRIC MOTORS
- NEON LIGHTS
- WI-FI MODEMS
2 - BEFORE INSTALLING “SMART REMOTE PROGRAMMER SOFTWARE” APP, MAKE SURE THE USB CABLE
IS NOT CONNECTED TO PC
PC PROGRAM
SMART Remote Programmer So ware Program has been developed to allow interfacing the SMART Remote
programmer device with informa on released by Silca.
The program can be freely downloaded from www.silca.biz/www.ilco.us website, and it run on Windows®
Vista, 7, 8 and 10.
The
fi
rst me the program is run, SMART Remote programmer device must be connected to PC, using a wizard
(see sec on “First program start”). Device must be connected to PC, at every program start.
FIRST PROGRAM START
Before star ng applica on: make sure SMART Remote Programmer device is connected to PC through a
special USB cable (supplied with the device).
USB driver installation procedure:
- For Windows 8 and Windows 10
®
Opera ng systems, connec ng your PC to the internet, drivers are auto-
ma cally installed by the opera ng system.
- For Vista and Windows 7
®
Opera ng systems, you will have to manually install USB drivers stored in the
Program File folder...\ Silca So ware\Silca SMART Remote Programmer\driver.
The first time the program is run, the following actions are required:
1. Program con
fi
gura on;
2. Device mandatory registra on;
3. Device con
fi
gura on;
