Silca Delta 2000 SA, Руководство по эксплуатации

Страница: 14 / 24

DELTA 2000 SA Operating manual - English
10 Copyright Silca 1998
5.4 Description of work station
The machine needs only one operator, who has the following controls at his/her disposal (fig. 7):
-
Safety device (R) (*).
- Motor START button (E), placed on the left side of the key-cutting machine and incorporating a lamp
to indicate that the machine is live.
- Carriage movement lever (O).
- Carriage lever handle (D).
- Gauge knob (F).
Fig. 7
5.5 Separate parts
The detachable parts of the machine are packed separately and must be fitted to the DELTA 2000 SA
by the operator, as follows:
P
OWER CABLE
First connect the safety device (R) (*) to the key-cutting machine and the power cable then connect the
free end of the power cable to the power mains (fig. 8).
Fig. 8
5.6 Connection to the mains
It is extremely important for the operator’s safety to ensure that the key-cutting machine is connected to
the power mains with the right voltage and by means of a properly earthed differential switch.
D
F
R
E
O
power cable
power
mains
R