Silca D444087XA, Руководство по эксплуатации

Страница: 32 / 36

6.9 Replacing the motor on switch
ATTENTION: remove the mains plug.
1) Loosen the 2 screws (M2) and remove the motor cover (Fig. 50).
2) Detach the 4 connectors (K2) paying special attention to their position.
3) Remove the switch (K) making pressure on the tabs with a screwdriver.
4) Fit the new switch in its seat and reconnect the 4 connectors (K2) paying special attention to their position.
5) Re-place the motor cover and secure with the 2 screws (M2).
Fig. 50 Fig. 51
6.10 Replacing the condenser
ATTENTION: remove the mains plug.
1) Loosen the 2 screws (M2) and remove the motor cover (Fig. 50).
2) Detach the connectors (Z) paying special attention to their position.
3) Remove the condenser (Y).
4) Fit the new condenser (Z).
5) Re-place the motor cover and secure with the 2 screws (M2).
Fig. 52 Fig. 53
Operating manual FASTBIT
Copyright Silca 2014
28