After a few seconds the display will show:
Key erased
on X position
After a few seconds the display will show:
Turn ignition on!
Press any key...
-
Turn the key to the
ON position
and press a key.
At the end of the operation return to the
“PROGRAMM. KEYS” (A).
KEYS TEST
ATTENTION:
to check that the key no longer works, test by trying to turn on the car engine.
1.1.1.3
ERASING CURRENT KEY
This function is used to erase a key inserted into the immobilizer unit; to continue enter the
PIN CODE
.
- Select
“ERASING CURRENT KEY”
and press
ENTER
; the display will show:
- ERASING CURRENT KEY -
Key erasing
in position X
NO
>YES
-
Select YES/NO and press
ENTER.
-
No
, to return to the previous menu.
-
Yes
, to erase the key from the position in the memory (Position X).
-
ESC
to quit.
- DATES INSERTION -
PIN CODE : XXXX
PIN
: XXXX
The
PIN CODE
must be entered and press
ENTER
.
10
