Air4 Universal Receiver
Copyright Silca S.p.A 2019. All right reserved
6
E n g l i s h
ADVANCED FUNCTIONS AND TROUBLE SHOOTING
How to insert the bu on of an Air4 V remote control back into the Universal Receiver.
This procedure is necessary if:
- The used Air4 V remote control has been lost / broken
- The bu on associated with the Air4 Universal Receiver was mistakenly overwri en with another
remote control
Procedure:
• Press bu on ‘P’ on the Air4 Universal Receiver for a few seconds un l LED 1/2
fl
ashes; release bu on
‘P’.
Note: With LED L1 on (relay 1 output) press bu on ‘P’ to select LED L2 (relay 2 output).
Press the free bu on on the AIR4 V remote control (with so ware version equal to or above
1.6)
un l
LEDs ‘L1’ and ‘L2’ illuminate with a
fi
xed light.
• Release the remote control bu on.
• When LEDS ‘L1’ and ‘L2’ go out, the AIR4 V bu on has been memorised on the receiver.
How to make other copies of a remote control
To make a copy of the
Air4 Universal Receiver
code (e.g. bu on 1) on other remote controls, use a Silca
AIR4 V remote control (with so ware version equal to or above 1.6) and follow Silca’s standard copying
instruc ons.
