Siko SG32, Перевод оригинальной инструкции по установке

Страница: 23 / 36

SG32
Installation English
SG32 · Date 23.07.2019 · Art. No. 85391 · Mod. status 189/19
23
Mounting the wire-actuated encoder ( Fig. 2, Fig. 3 ):
The wire actuated transmitter is a high quality measurring device and
should be mounted to a flat surface.
1
Fig. 2: Mounting
1
Elongated holes
1. Use the 8 slot holes for fixing the unit to the mounting surface
1
.
1
Measuring range
max. extension length
Fig. 3: Extension length check
2. After mounting, check that the maximum extension length complies
with the application ( Fig. 3 ). The wire end piece / wire must be pulled
out up to the planned fixation point. Wire torsion should be avoided.
3. If the extension lenght is according the requirements. The wire accom-
modation can be mounted.
Mounting the wire accommodation with thread ( Fig. 4 ):
1. Pull the wire end piece (
1
...
3
) or wire, respectively to the intended
fastening position.
2. Mount the wire accommodation
1
using the lock nut
2
and the set-
ting nut
3
.