LE200
Safety information English
LE200 · Date
10.09.2018 · Art.
No.
84882 · Mod.
status
232/18
17
Important operating information that may facilitate operation or many
cause unplanned device reactions if disregarded including possible prop-
erty damage.
Signal symbols
2.3 Target group
Installation instructions are intended for the configuration, commission-
ing and mounting personnel of plant or machine manufacturers who pos-
sess special expertise in drive technology. This group of operators needs
profound knowledge of a magnetic sensor necessary connections and its
integration into a complete machinery.
Insufficiently qualified personnel
Insufficiently qualified personnel cause personal injury, serious damage to
machinery or magnetic sensor.
`
Configuration, commissioning, mounting and maintenance by trained
expert personnel only.
`
This personnel must be able to recognize dangers that might arise
from mechanical, electrical or electronic equipment.
Qualified personnel are persons who
•
are familiar with the safety guidelines of the electrical and automation
technologies when performing configuration tasks;
•
are authorized to commission, earth and label circuits and devices/
systems in accordance with the safety standards.
2.4 Basic safety information
Danger of explosion
`
Do not use the magnetic sensor in explosive zones.
Movable parts
Bruising, rubbing, abrasing, seizing of extremities or clothes by touching
during operation any movable parts as for example sensor.
`
Install protective facilities to prevent people from getting access.
NOTICE
WARNING
DANGER
WARNING
