Siko IK360L, Перевод оригинальной инструкции по установке, Страница: 15 / 28

IK360L
Documentation English
IK360L · Date 01.09.2020 · Art. No. 89208 · Mod. status 198/20
15
1 Documentation
The following documents describe this product:
• The data sheet describes the technical data, the dimensions, the pin
assignments, the accessories and the order key.
• The installation instructions describe the mechanical and electrical
installation including all safety-relevant requirements and the associ-
ated technical specifications.
• The user manual for commissioning and integrating the inclinometer
into a fieldbus system.
These documents can also be downloaded at "
http://www.siko-global.
com/p/ik360l ".
2 Safety information
2.1 Intended use
The IK360L inclinometer is a simple, highly integrated and compact mea-
suring instrument. It measures the angle in absolute relation to the
plumb-line. The inclinometer is only intended for use in industrial appli-
cations that are not subject to special electrical or mechanical safety
requirements.
1. Observe all safety instructions contained herein.
2. Read all documents provided on the CD.
3. Arbitrary modifications and changes to this inclinometer are forbid-
den.
4. Observe the prescribed operating and installation conditions.
5. Operate the inclinometer exclusively within the scope of technical
data and the specified limits (see chapter
8
).
2.2 Identification of dangers and notes
Safety notes consist of the signal symbol and a signal word.
Danger classes
Immediate danger that may cause irreversible bodily harm resulting in
death, property damage or unplanned device reactions if you disregard
the instructions given.
Danger that may cause serious bodily harm, property damage or
unplanned device reactions if you disregard the instructions given.
DANGER
WARNING