AG02
Commissioning English
AG02 · Date
31.10.2012 · Art.
No.
82270 · Mod.
status
354/12
50
Analog unipolar design: 2 digital inputs "Enable" & "Direction" and 1
"unipolar analog input"
Analog bipolar design : 1 digital input "Enable"und 1 "bipolar analog
input"
For the analog versions, speed is determined by the analog input voltage
"0 ... 10 V" or "-10 ... +10 V", respectively. Here, the "Enable" input ena-
bles the analog target value. For the digital version, fast and creep speeds
are determined by means of 2 potentiometers.
After removing the covers
1
, potentiometers P1 and P2 are accesible.
1
Cover
2
Network
3
Encoder
4
Inpuls
Fig. 13: Setting the trimming potentiometer PWM
Only with motor control digital
Potentiometer Description
P1
Speed setting in fast motion; PWM continuously adjus-
table 0 to 100 % (left stop 0 %; right stop 100 %).
Active fast/slow input.
P2
Speed setting in fast motion; PWM continuously adjus-
table 0 to 100 % (left stop 0 %; right stop 100 %).
Inactive fast/slow input.
