SIIG Wireless-N CardBus Adapter, Быстрое руководство по установке

Страница: 15 / 28

15
After you select Switch to AP Mode , the Ralink utility icon
will indicated the wireless card is operating in AP mode
now. If you want to switch the wireless card back to station
mode (become a client of other wireless access points),
click Switch to Station Mode .
Config
Figure 13
SSID : Please input the SSID (the name used to identify this
wireless access point) here. Up to 32 numerical characters
can be accepted here, excepting space.
TX Rate : Please select the data transfer rate here. The
maximum TX rate you can select here depends on the
wireless mode you’re using. It’s safe to select Auto to let
wireless card select a proper TX rate according to the
strength and quality of radio signal. When the wireless
mode is set to 802.11 B/G/N Mix , TX Rate will be set to Auto
and cannot be changed.