5
For Existing Hard Drives with Data
1.
During boot press
Ctrl+R
to enter the
RAID
BIOS.
2.
Select
Disk,
press
Enter
.
3.
Select
Reserved for RAID
, then press
Enter
.
4.
Select the single hard drive then press
Enter
.
5.
When asked,
All data in selected drive will lost!
Continue (Yes/No)?
, select
Yes
, then press
Enter
.
6.
Select
RAID
, then select
Rebuild
.
7.
Press
Enter
.
The mirror will begin rebuilding. Do
not interfere with the process.
8.
When rebuilding is finished, select
Exit
, then press
Enter.
9.
When asked
Are You Sure to Exit(Yes/No)?
, select
Yes,
then press
Enter
to exit and reboot.
JBOD
This RAID array to be used on
New/Blank
hard drives.
JBOD will destroy existing data on the hard drive.
1.
As the BIOS boots press
Ctrl+R
when prompted to
enter the
RAID
BIOS.
2.
At the next screen select
RAID
, then press
Enter
.
3.
Select
Create,
then press
Enter
.
4.
Select
JBOD
, then press
spacebar
.
5.
Create name, press
Enter
.
6.
Select
Exit
, then press
Enter
.
7.
When asked
Are You Sure to Exit(Yes/No)?
, select
Yes,
then press
Enter
to exit and reboot.
8.
Continue with
Fdisk
and
Format
steps as if you
were installing a conventional hard drive.
Содержание SC-SA3012-S1
Страница 12: ...12 Blank Page ...
Страница 13: ...13 Blank Page ...
Страница 14: ...14 Blank Page ...
