5
2.
Restart your system when prompted by Windows'
installation.
3.
At the
Windows Setup
screen, press
F6
to install the
driver.
4.
Insert the driver
diskette. Press
S
then press
Enter
.
5.
Select
INITIO INIC1620 S-ATA Adapter For
Windows XP/2003
and press
Enter
.
6.
Press
Enter
to continue and follow on-screen
instructions to complete the installation.
Existing Windows XP/Server 2003 Installation
1.
Install the board and boot up Windows.
2.
At the
Found New Hardware Wizard
:
XP (w/SP1 or earlier)/Server 2003:
Continue to step #3.
XP (w/SP2 or later)/Server 2003 (w/ SP1 or later):
Select
No, not at this time
, then click
Next
.
3.
Insert the driver CD, select
Install the software
automatically (Recommended)
, then click
Next
.
Click
Next
again to continue.
4.
Click
Continue Anyway
, then click
Finish
.
Note
: Our driver has been thoroughly tested in
Windows for stability.
5.
Restart Windows to complete the driver installation.
To Verify Windows 2000/XP/2003 Installation
1.
Right click
My Computer
,
click
Manage
and select
Device Manager
.
2.
Double click
SCSI and RAID Controllers
, then
double click
Initio inic1620 S-ATA Adapter
. A
message
This device is working properly
is displayed
in the dialog box, the driver has been correctly
installed.
