SIIG SC-SA0412-S1, Быстрое руководство по установке

Страница: 4 / 8

4
Using the Cool Dual SATA to USB 2.0
Windows
One drive icon for each inserted SATA hard drive will
appear in My Computer when the converter is plugged
into a USB port. The drive(s) act just like a conventional
hard drive in your system.
Note : Be careful not to touch the hard drive while
in use. It will be warm.
Disconnecting From The Computer
Important : Do not insert or remove a hard drive while
the Cool Dual SATA to USB 2.0 Docking is powered on.
Before unplugging the Cool Dual SATA to USB 2.0 Docking
from the computer, it must first be stopped, by using
Windows' Safely Remove Hardware utility. Follow the
steps below for your version of Windows. The same
rule applies when turning off the Cool Dual SATA to USB
2.0 Docking . Not following the instructions may result in data
corruption or damage to the hard drive.
Windows 2000
1. Verify that the HDD LED(s) are OFF before
proceeding.
2. Double click the Unplug or Eject Hardware icon
located in the system tray.
3. Highlight USB Mass Storage Device , click Stop .
4. Click OK , click OK again, then Close .
5. You can now unplug or turn off the Cool Dual SATA
to USB 2.0 Docking .