2
• 80 MB of available hard disk space
• Video card with 4 MB RAM (PCI or AGP)
• Windows 98 SE/ME/2000
Package Contents
• One 1394 3-port host adapter
• Deluxe Ulead VideoStudio DV editing software
• One 1394 (FireWire) 6-pin/4-pin DV cable
• This quick installation guide
Hardware Installation
General instructions for installing the card are provided below, since
the design of computer cases and motherboards vary. Refer to your
computer’s reference manual for further information, if needed.
1. Turn OFF the power to your computer.
2. Unplug the power cord and remove your computer's cover.
3. Remove the slot bracket from an available PCI slot.
4. Carefully align the card to the selected PCI slot push the board
down firmly, but gently, until it is well seated.
5. Replace the slot bracket's holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.
Driver Installation
Please make sure the board is installed before proceeding with
driver installation.
Windows 98SE Driver Installation
1. When Windows boots up, a New Hardware Found dialog box
should appear and the OHCI Compliant IEEE 1394 Host
Controller
is identified.
2. At the Add New Hardware Wizard window, click Next.
3. Choose Search for the best driver for your device, and click
Next
.
4. Clear all check boxes, click Next, choose The Updated Driver
(Recommended)
, click Next, Next, and Finish to complete
driver installation.
