3
1.
Turn OFF the power to your computer and any
other connected peripheral devices. Unplug the
computer's power cord.
2.
Remove your computer’s cover and install the card
in an available PCI slot.
3.
Push the board down firmly, but gently, until it is
well seated.
4.
Connect an available 4-pin power connector from
the system power supply to the 4-pin power
connector on the
FireWire 800 3-Port PCI
(see figure
1, page 2). This connection is optional, but
recommended for reliable power output.
5.
Secure the card and replace the cover.
Driver Installation
This section provides information on how to install the
FireWire 800 3-Port PCI
drivers.
Windows Driver Installation
Windows 98SE
1.
At the
Add New Hardware Wizard
, click
Next
.
2.
Select
Search for the best driver for your device
(Recommended)
, then click
Next
.
3.
Insert the driver CD, check
CD-ROM drive
, uncheck
the other boxes, then click
Next
.
4.
Click
Next
, then
Next
again.
5.
If prompted for the
Windows 98SE
CD, insert it, then
click
OK
.
6.
Click
Finish
and restart Windows to complete the
installation.
