SIIG JU-SA0H11-S1, Быстрое руководство по установке

Страница: 5 / 16

5
3. Hold onto the hard disk drive and turn
hard disk drive tray side ways. Secure the
hard disk drive with four mounting screws.
4. Slide the top cover back into the case and
secure it by sliding the lock on the bottom of
the enclosure, see Figure 4 .
5. Connect the Micro-B connector of the
included USB 3.0 Y-split cable into the
Micro-B connector of the enclosure. See
Figure 2 in page 3 for more information.
6. Connect the Type-A, USB Data connector
of the included USB 3.0 Y-split cable to an
available USB port of the computer (USB
3.0 recommended). See Figure 2 in page 3
for more information.
Figure 4