SIIG JU-000071-S1, Быстрое руководство по установке

Страница: 4 / 12

4
5. When Windows resumes, plug the USB 2.0 to VGA
into the computer.
6. Click Install two times.
Note : Some systems will go to 8-bit resolution after
installing the driver. Please reset it back to your
normal resolution.
Windows XP (32-/64-bit)
1. Insert the driver CD. Click Start , then Run , type
D:\setup.exe , click OK . (Change D: to match your
CD-ROM drive letter)
2. Click Next , select I accept the terms of the license
agreement , then click Next .
3. Click Continue Anyway , then click Finish .
4. Connect your second monitor to the USB 2.0 to
VGA and turn it on. When Windows resumes,
connect the USB 2.0 to VGA to the computer.
5. Select No, not this time , click Next .
6. Select Install the software automatically
(Recommended) , click Next , click Continue
Anyway three times, then click Finish to complete
the installation.
Note : The main screen will blink to blank screen a
couple of times during the installation. This is
normal.