SIIG JJ-P20511-S3, Быстрое руководство по установке

Страница: 3 / 12

3
2. Unplug the power cord and remove your computer's
cover.
3. Remove the slot bracket from an available PCI slot.
4. Carefully align the card to the selected PCI slot,
push the board down firmly, but gently, until it is
well seated.
5. Replace the slot bracket screw to secure the card.
6. Replace the computer cover and reconnect the power
cord.
Software Installation
This section provides the steps on how to install the
2-Port Serial 550-Value drivers. Please make sure the board
is installed before proceeding with the driver installation.
Windows 8 (32-/64-bit) / 7 (32-/64-bit) / Server
2008 R2
1. Install the board and boot up Windows.
2. Right click Computer , click Manage , click Device
Manager .
3. Insert the driver CD. Close the AutoPlay box if
prompted.
4. Right click PCI Serial Port listed first, click Update
Driver Software .
5. Click Browse my computer for updated software .
For 32-bit : Type D:\32bit , click Next . (Change D: to
match your CD-ROM drive letter)
For 64-bit : Type D:\64bit , click Next . (Change D: to
match your CD-ROM drive letter)
6. At Windows has successfully updated your driver
software , click Close .