3
Powering the Hub
Use an external power adapter (not included), with
selectable 9V to 24V DC output, and connect it to the
hub's DC Power Jack or 3-Pin Terminal Block.
Note
: The hub requires an external power adapter
(not included) to work properly.
DC Power Jack
Plug the power adapter into a reliable power source then
connect it to the hub's DC Power Jack. See
Figure 3
.
Figure 3: DC In
3-Pin Terminal Block
Plug the included terminal block into the hub's terminal
block connector. See
Figure 4
.
Refer to the
Pin Assignment
on page 4 for wiring the
power adapter.
Figure 4: Power Terminal
DC power
jack
