SIIG ID-SC0011-S1 Скачать руководство пользователя страница 7

7

Technical Support and Warranty

QUESTIONS?

  SIIG

Online Support

 has answers!  Simply visit our

web site at 

www.siig.com

 and click 

Support

.  Our online support

database is updated daily with new drivers and solutions.  Answers

to your questions could be just a few clicks away.  You can also submit

questions online and a technical support analysts will promptly

respond.
SIIG offers a 5-year manufacturer warranty with this product.  Please

see our web site for more warranty details.  If you encounter any

problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the

product to the store where you purchased from.
B)  If your purchase has passed the store's return policy period, please

follow these steps to have the product repaired or replaced.

Step 1:

  Submit your RMA request.

Go to 

www.siig.com

, click 

Support

, then 

RMA

 to submit a

request to SIIG RMA.  If the product is determined to be

defective, an RMA

 

number

 

will be issued.

Step 2:

  After obtaining an RMA number, ship the product.

Properly pack the product for shipping.  All software, cable(s)
and any other accessories that came with the original package

must be included.

Clearly write your RMA number on the top of the returned
package.  SIIG will refuse to accept any shipping package, and

will not be responsible for a product returned without an

RMA number posted on the outside of the shipping carton.

You are responsible for the cost of shipping.  Ship the product
to the following address:

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

RMA #:

SIIG will ship the repaired or replaced product via Ground
in the U.S. and International Economy outside of the U.S. at

no cost to the customer.

Содержание ID-SC0011-S1









Отзывы: