SIIG Hi-Speed USB 4-Port PCI, Быстрое руководство по установке

Страница: 4 / 8

4
1. Turn OFF the power to your computer and any
other connected peripheral devices.
2. Unplug the power cord and remove your
computer's cover.
3. Remove the slot bracket from an available PCI slot.
4. Carefully align the card to the selected PCI slot,
push the board down firmly, but gently, until it is
well seated.
5. Replace the slot bracket holding screw to secure the
card.
6. Replace the computer cover and reconnect the
power cord.
Windows Driver Installation
Windows 8, 7, Windows Vista, XP Service Pack 1 or later,
Server 2003 & 2008, Server 2008 R2, and 2000 Service Pack
4 have built-in driver support for this controller. Just install
the board and Windows will automatically detect and
install the correct drivers for it. No additional driver is
needed.
To Verify Windows Installation
1. Check Device Manage to verify installation.
For Windows 8 / 7 / XP / Server 2003 / 2000 : Right click
Computer or My Computer , click Manage , then
click Device Manager .