SIIG FireWire 800 ExpressCard, Быстрое руководство по установке

Страница: 3 / 12

3
Driver Installation
This section provides information on how to install the
FireWire 800 ExpressCard drivers.
Windows 2000
Windows 2000 automatically installs it's built-in 1394a
driver for the FireWire 800 ExpressCard . To get the full
speed out of this controller, install the Firewire 800 driver
using the directions below.
1.
Insert the driver CD. Click Start , Run . Type
D:\setup32.exe , click OK . (Change D: to match the
drive letter of your CD-ROM)
2. At the Welcome screen, click Next .
3. At the License Agreement screen, click Yes .
4. At the Destination Location screen, click Next .
5. Select Complete , then click Next .
6. At the Program Folder screen, click Next .
7. At the Digital Signature screen, click Yes , then click
Finish .
8. Select the restart Windows option, then click Finish .
32-bit Windows XP
Windows XP automatically installs it's built-in 1394a
driver for the FireWire 800 ExpressCard . To get the full
speed out of this controller , install the Firewire 800 driver
using the directions below.
1.
Insert the driver CD. Click Start , Run . Type
D:\setup32.exe , click OK . (Change D: to match the
drive letter of your CD-ROM)
2. At the Welcome screen, click Next .