3
Inserting the CardBus
General instructions for installing the cardbus are provided
below. Since the design of notebook computers may
vary, refer to your system’s reference manual for further
information, if needed.
1.
Power off your notebook computer and any
connected peripheral devices.
2.
Insert the PC Card into the CardBus Type II slot
of your notebook computer with its 68-pin
connector facing the slot. Make sure it is inserted
all the way in for a solid connection.
3.
Connect to the network by connecting a fiber cable
between the Tx (transmit) port and the connecting
device's Rx (receive) port. Connect another fiber cable
between the Rx (receive) port and the device's Tx
(transmit) port.
4.
Power on your notebook PC.
Figure 2. Inserting the Cardbus
