2
Figure 1: Rear Panel
•
HDMI In LED: will light up when your HDMI
source is powered on and working properly
•
DIP Switch: 1 = Off: use default EDID; 1 = ON: Learn
EDID from the display connected to HDMI Out;
2 = OFF: HDMI with 5.1ch/7.1ch audio mode;
2 = ON: HDMI with stereo audio mode
•
HDMI In: connect your HDMI source via HDMI
M-M cable here (cable not included)
•
Audio Out: 3.5mm audio jack, plug in your local
stereo speakers here
•
HDMI Out: connect a local display here
•
RJ-45 Out: link to the next transceiver/receiver
(optional) or remote display via RJ45 adapter. The
two
LED
s will light up when the
HDMI over CAT5e
Transmitter
is powered up
•
Power Jack: plug in the 5V power adapter here
HDMI In
LED
DIP
Switch
HDMI
In
Audio
Out
HDMI
Out
RJ-45
Out
Power Jack
LED
Package Contents
•
HDMI over CAT5e Transceiver
& 4 rubber pads
•
Power adapter (5V DC)
•
Quick Installation Guide
Layout
