Button View
Note: Please don’t plug DVI cable into PC-DVI connector when you are
changing one mode to another.
1 2 Mode
Off Off Reserved mode, no use.
Off On Recording: Connect the monitor to the DVI-monitor connector, once
the recording process is completed, the EDID Reader/Writer has copied the
EDID from the monitor into its flash memory and the green LED will turn off
On On Writing default: Write the default EDID into unit to replace the existing EDID in
the EDID Reader/Writer. Once the writing process is completed, the green LED
will turn off.
On Off Connection mode: Set DIP switches at this position before you connect your
computer to the unit.
* To avoid initiating undesired errors during switching between modes (e.g. changing from
Recording mode to Connection mode might overwrite the EDID of the display in the EDID
Reader/Writer by the default EDID), please unplug the power cord before you change one
of the above modes to another. Plug in the power cord after you have changed the
position of the DIP switches.
