5
5.
Plug your speakers into the Speaker jack of the
AVTuner Pro.
6.
Connect the Switching Power adapter to the Power
connector, then plug the power adapter into a
reliable power source.
Operating Instructions
Configuring the AVTuner Plus
The first time you use the AVTuner Plus, follow the
directions below in the order in which they appear. See
Menu Options, on page 6, for more information.
1.
Press the Power button to power on the AVTuner
Plus. Power on the computer or the Monitor.
2.
Press the Menu button on the front panel or remote
control to display the Menu Options.
3.
Use the Vol buttons to change to the Area Settings
menu, then press Enter on the front panel. Use the
Ch buttons on the front panel to select your country,
then press Enter on the front panel to confirm.
4.
Use the Vol button to change to the TV Source
menu, then press Enter on the front panel. Use the
Ch buttons on the front panel to select TV or CATV,
then press Enter on the front panel to confirm.
5.
Use the Vol button to change to the Auto Scan
menu, then press Enter on the front panel. Use the
Ch buttons on the front panel to select Channel
scan, then press Enter on the front panel to begin
scanning.
Note: Selecting Freq Scan or Finetune will increase
the number of channels found, however, the process
may take longer.
