SIIG AV-GM06W3-S1, Руководство пользователя

Страница: 15 / 19

13
output port one by one, the selected output port will change to gray.
The linking line will change to yellow.
Group setting
First select output ports one by one. Then select the input source. The selected output ports
change the setting at the same time.
By using Terminal:
Baud rate: 9600
Data length:
8bit
Parity check: No
Stop bit: 1
Command Set:
COMMAND ACTION COMMAND ACTION
ST System Status VR Firmware Version
A1 Output A selects Input 1 E1 Output E selects Input 1
A2 Output A selects Input 2 E2 Output E selects Input 2
A3 Output A selects Input 3 E3 Output E selects Input 3
A4 Output A selects Input 4 E4 Output E selects Input 4
A5 Output A selects Input 5 E5 Output E selects Input 5
A6 Output A selects Input 6 E6 Output E selects Input 6
A7 Output A selects Input 7 E7 Output E selects Input 7
A8 Output A selects Input 8 E8 Output E selects Input 8
B1 Output B selects Input 1 F1 Output F selects Input 1
B2 Output B selects Input 2 F2 Output F selects Input 2
B3 Output B selects Input 3 F3 Output F selects Input 3
B4 Output B selects Input 4 F4 Output F selects Input 4
B5 Output B selects Input 5 F5 Output F selects Input 5
B6 Output B selects Input 6 F6 Output F selects Input 6
B7 Output B selects Input 7 F7 Output F selects Input 7
B8 Output B selects Input 8 F8 Output F selects Input 8
C1 Output C selects Input 1 G1 Output G selects Input 1
C2 Output C selects Input 2 G2 Output G selects Input 2
C3 Output C selects Input 3 G3 Output G selects Input 3
C4 Output C selects Input 4 G4 Output G selects Input 4
C5 Output C selects Input 5 G5 Output G selects Input 5