7
ROTARY CONTROL
In order to adapt the CAT5 cable, AV-GM06B3-S1 offers 8-level equalization control
on the received HDMI signal level. 0-to-7 = strongest-to-weakest signal level for
respective transmission length [long to short]. It is recommended to switch from 7
to 0 to find the optimal visual experience.
HDMI OUTPUT FORMAT SELECTION
When input signal exists, the output format LED turns on. If the input HDMI source is HDMI 1.3
format, you can set the output format to HDMI 1.2 mode and Red LED will be on. If the input HDMI
source is HDMI 1.2, the output format is always set to HDMI 1.2. The main purpose of lower the
HDMI 1.3 resolution [36~48-bit color depth] to HDMI 1.2 [24-bit color depth] is to increase the
transmission distance without creating noticeable video quality distortion still at 1080p. By pressing
the push-in button, users can enforce the HDMI output at HDMI 1.2 format for longer transmission
to the display. The AV-GM06B3-S1 cannot upgrade the HDMI 1.2 source content to become HDMI
1.3 format.
EDID LEARNING
1. Power up the AV-GM06B3-S1. Connect to HDMI OUT7 with the display you want the
AV-GM06B3-S1 to learn its EDID.
2. The AV-GM06B3-S1 is only bound to learn the EDID from the display for the HDMI source device
connected to HDMI IN2. For HDMI signal input at RJ45 IN1, please use the transmitting device
that sends the HDMI signals over CAT5 to the HDMI Signal IN1 of the AV-GM06B3-S1 to learn the
EDID of the display.
3. To learn the display's EDID for source device connected to HDMI IN2, pull both DIP switch pin#1
& pin#2 up-and-down to stay at ON[ ]-ON[ ] and wait for about 5 seconds to complete the EDID
learning process. You DON'T NEED to pull up the DIP switch again unless you want to learn
another display's EDID by pulling both DIP switch pin#1 & pin#2 up-and-down one more time.
