SIIG AV-GM04H3-S1, Руководство пользователя

Страница: 5 / 16

3
PANEL DESCRIPTIONS
Transmitting unit
►
AV-GM04H3-S1-TX
Front Panel
1. +5V DC: Connect to a 5V power supply unit
2. HDMI IN: Connect to a HDMI source with a HDMI male-male cable
3. Status LED: When device read the firmware, the indicator LED will light
4. Signal LED: When user connect to the source, the indicator LED will light
5. SFP OUT: Connect a duplex, LC terminated multimode fiber cable
6. Ethernet Port: Ethernet control port
Rear Panel
7. RS-232: Connect to serial port device with a DSUB-9 male-male or male-female cable here
8. Transmission Status LED: When device transmit the Ethernet frames at a rate of 10Gb/s, the
indicator LED will light
9. Receiving Status LED: When device receive the Ethernet frames at a rate of 10Gb/s, the indicator
LED will light
10. Audio IN: Connect an audio source device here
11. IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver
12. IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster