SII DPU-S445 SERIES, Техническое описание

Страница: 120 / 176

6-73
GS 'w' n1 n2 Set Width of Bar Code
Code 1DH 77H n1 n2
0

n1

255
0

n2

255
Function Specifies the bar code narrow width and wide width in dots.
The two low-order bits of n1 and n2 are valid. They are set as follows:
Narrow width Wide width
n1 Dots n2
0 2
n1
0 1 2 3
1 3 0 5 6 6 6
2 4 1 7 8 9 9
2 9 10 11 12
If the two low-order bits of n1 are 3, it is ignored to n1, and n2 will be processed as normal data.
Note Specify n1 and n2 to 1 and 2 or larger when printing ladder bar code (its bar is to be printed
horizontally against paper feed direction). If doing so may cause loss of reading accuracy.
Default n1=1 (narrow width: 3 dots), n2=2 (wide width: 9 dots)
GS 'P' n Set Bar Code Print Position
Code 1DH 50H n
Function Sets the bar code print position.
Only the two low-order bits of n are valid.
n = 0: Print a bar code at the left.
n = 1: Print a bar code at the center.
n = 2: Print a bar code at the right.
n = 3: Ignored
Default n=0 (Print a bar code at the left.)
GS 'n' n Nominal Fine Element Width
Code 1DH 6EH n
2

n

8
Function Sets a norminal fine element width by dot.
n:Norminal fine element width in a dot number.
Sets the norminal fine element width of PDF417 n dots.
Default n=2