Sigur MR1, Руководство пользователя

Страница: 27 / 36

27 Sigur MR1
INSTALLATION AND CONNECTION
OF THE READER
4.3.
1. Connect the wires of the reader and the incoming cable according to
the connection chart using the Scotchlok
TM
terminal kit (included).
2. The terminals are designed for cables with core diameter
of 0.4 to 0.9mm.
3. You do not need to strip the wires before connecting them to the cable.
4. Insert the wires until they are securely in place and press the connector
(you can use pliers to do this) by completely burying the colored part in
the transparent part.
5. Triple connectors allow the user to branch off one control line from
the controller both to green LED indicator and to sound or to pair
four wires of the connecting cable into one “common” wire and one
“positive power supply” wire of the reader to enable long-distance
connection.
6. The wall-mounted panel and the reader are connected via a bayonet
connection. Align the teeth of the reader with the grooves of the wall-
mounted panel by placing the reader at a slight angle.
7. Slightly press the reader into place and turn it horizontally
until it clicks.