Sigrand SG-17B, Руководство пользователя

Страница: 24 / 36

24
3.3. Management of the DSL interface
DSL interface is adjusting by use of the following commands:
master | slave - set modem mode: master(CO) or slave(CPE)
annexA|B - G.SHDSL.bis Annex type
tcpamXXX - line coding, XXX={16,32,64,128}
rate <value> - line rate
plesio | plesio-ref|sync - Plesiochronous/Plesio-Ref/Synchronous modes
pbo-normal|pbo-forced<val> - Power Backoff mode, <val> - value in dB
3.3.1. Choosing between the «master»/«slave» options
For operation in the communication line, the given pair of modems is to be
arranged as follows: one of the modems is to be selected as the «master»
and the other as a «slave». The arrangement is performed via commands
master
or
slave
, respectively.
> master
Configuration......
Configuration complete
>
> slave
Configuration......
Configuration complete
>
It is recommended that the modem which is easier available for managing,
adjusting and maintaining, should be selected as «Master».
3.3.2. Adjusting the DSL interface rate
The speed of connection is only to be set at the «Master» modem whereas
the «Slave» will be automatically adjusted in correspondence with the
settings of the «Master».