The
info
command
The
stat
command
The
default
command
The
reboot
command
3.3 DSL interface management
The
help dsl
command
The
dsl
command
3.3.1 “Master”/”slave” mode selection
The
dsl master
and
dsl slave
commands
3.3.2 Setting DSL rate
3.3.2.1 Setting DSL rate from “master” modem
The
dsl rate
command
3.3.2.2 Setting DSL rate manually both sides
3.3.3 Line coding selection
The
dsl code
command
3.3.4 Link statistics
The
dsl stat
command
The
dsl stat reset
command
3.3.5 How to force a retrain
The
dsl retrain
command
3.4 Ethernet interfaces management
The
eth help
commands
The
eth
command
3.4.1 Rate and duplex type
The
eth auto, eth /auto, eth
rate, eth half, eth full
commands
3.4.2 Flow control
The
eth flow
and
eth /flow
commands
4. Updating built-in modem firmware
Warranty and scope of liability
Appendix I
Appendix II
3
