-2-
Series MHE-RE
Moonlite LED™
High Output Emergency Light
02.17.02
Fig. 2. SURFACE MOUNT WITH END BRACKETS
Fig. 3. SURFACE MOUNT TO J-BOX
WIRING SHOWN FOR EM OPERATION ONLY
WIRING SHOWN FOR EM & NORMAL ON OPERATION
END BRACKET
(2) SUPPLIED
PIGTAIL & LAMP
CONNECTOR (SUPPLIED)
24 VDC
IN/ OUT
24 VDC
IN/ OUT
BL
BL
Y
B
R
BL
Y
B
R
YB R
CEILING
POLARIZED LAMP
CONNECTOR
LAMP
HOUSING
MOUNT
SCREWS
(2) REQ'D
LAMP
ASSBY
COVER
SCREW
ANCHOR
BRACKET
SCREW
(4) SUPPLIED
LAMP
ASSBY
COVER
15 1/2”
CEILING
J- BOX
4" Octagon
24 VDC
IN/ OUT
24 VDC
IN/ OUT
B Y R BL
SURFACE MOUNT WITH END BRACKETS
1. See Fig 2. Install (2) screw anchors at 15 ½” centers.
2. Insert flat blade screwdriver under notch at end of cover, twist gently to release cover plate. Unscrew (4) #8 lamp assembly screws, lift lamp
assembly from Housing and disconnect lamp plug.
3. Attach end brackets with (4) #8 screws and nuts as shown, mount housing assembly to ceiling and route 24VDC IN/OUT wiring from CBS
branch circuit into housing.
4. Proceed as for STANDARD SURFACE MOUNT steps 4 - 5
SURFACE MOUNT TO J-BOX
1. See Fig 3. Install standard 4” Octagon J-box centrally above installation point as shown and secure to ceiling using appropriate screw
anchors. 2.
Route 24VDC IN/OUT wiring from CBS branch circuit into j-box.
KEY
B= BLACK:COMMON: 12/24 VDC NEG -
Y= YELLOW: EXITS/CVRE: 12/24 VDC POS +
R= RED: EMERGENCY: 24VDC POS +
BL= BLUE: NORMAL ON LIGHTING (NOL): 24 VDC POS +
