Signode TABLE-TYER, Руководство по эксплуатации, частям и безопасности

Страница: 3 / 42

12/14/10
WARNING - READ AND FOLLOW THESE INSTRUCTIONS - FAILURE TO DO
THIS COULD RESULT IN SEVERE PERSONAL INJURY.
OPERATING INSTRUCTIONS
1. Only people trained in the use of strapping machines are to operate or service this machine.
2. Read all signs on machine. Do not remove, modify or deface any sign. Replace all damaged
signs.
3. Inspect the machine for unsafe conditions - DAILY - and replace all worn or broken parts.
4. Keep work area uncluttered and well lit.
5. If you require safety instructions in another language, contact your local Signode
representative.
MAINTENANCE
1. Establish a preventive maintenance program for your machine by following the preventive
maintenance program in this manual.
2. To ensure proper machine operation, use the specified power sources listed in this manual.
3. Do not overload the machine by exceeding the package size specification.
4. Remove all packages from the machine before performing service.
5. Unless otherwise noted in this manual, disconnect and lockout all power before servicing your
machine.
6. Follow all maintenance and service instructions in this manual.
MOVING MACHINE PARTS
1. Disconnect and lock out all power to Signode's machines before entering the strap chute area.
2. Never put any part of your body into the strap chute area or machine enclosure with machine
power on.
3. Never stand on the machine table-top.
MACHINE INSTALLATION
1. All customer interlocks must be connected as shown in this manual's electrical drawings.
Failure to properly connect interlocks can result in improper machine operation and/or
personal injury.
2. Be familiar with the locations of safety interlocks/guards and Emergency Stop Devices - refer
to machine manual topic "Disconnect & Lockout Procedures".
3. Do not defeat any safety interlock or safety device. Do not operate machine with any safety
devices/guards removed.
4. Before operating the machine, ensure that all safety interlocks and Emergency Stop buttons
are operating properly.
5. Unauthorized modifications can present a safety hazard to machine personnel and will void the
machine warranty.
6. Secure the machine in place using the locking casters.
3