Signode Josef Kihlberg 126141, Руководство по эксплуатации

Страница: 8 / 44

8
05.20
Josef Kihlberg JK20-680FN
7
PREVENTIVE AND CORRECTIVE MAINTENANCE
Before all maintenance tasks on the
stapler always first disconnect it from
the air supply.
To remove a jammed staple.
– Remove the four screws (fig.5/1) and remove the
door.
– Clean the canal from defective staples.
– Assemble the door.
7.2 REMOVING JAMMED STAPLES
Fig. 5
7.1 CLEANING THE STAPLER
This stapler does not require special servicing. It only
needs regular cleaning with a non-aggressive (non-
corrosive) cleaner agent. Do not remove any parts for
cleaning purposes!
Check the proper functioning of all safety
devices daily. Make especially sure that:
– the trigger works smoothly, the door stays in place
and the magazine lid does not open itself.
– all screws and nuts are securely tightened.
– the stapler is regularly lubricated (refer to chapter
5.2).
1