Basic Installation Instruction for the P-Cast DE7000 Media Player
9
Addendum 2: Connecting the Media Player to a consumer panel (TV)
We have tested the media player with all known professional panels from Philips as well al many
other industrial panels.
However, if you would like to connect the media player to a TV screen the following is to be
checked:
Mandatory:
-
The TV must support a resolution of 1360 x768
-
The TV must support a DVI or HDMI input
-
Auto source detection/ last source selection.
-
If the user wants to connect the TV also to a TV signal source it should have a coax antenna
connector.
Preferred:
-
Build in Timer to activate TV or set it in standby mode at a scheduled time and date.
Tips:
-
The media player only checkes for a TV signal if the TV is set into
“on” position at the time of
player boot. If the TV is turned of
–because it is connected to an external timer device- the
media player will not detect a signal and therefore it will not show an image after the TV is
set on.