6/26/2019
page 2
www.gardcolighting.com
442295035451 Rev A
DuraForm Accessory Installation Instructions
WRG
-
Wireguard
WRG + VSR or GSH
Wireguard nested in Visor or Glare Shield
STEP 1:
Align Wireguard to mounting points on housing as shown
below.
STEP 2:
Insert two of the provided spacers between the wireguard
clip and the housing.
STEP 3:
Secure Wireguard to housing using the provided slotted
hex head 10
-
24 x
5/8”
screws using 27 in
-
lbs torque.
STEP 1:
Align Visor or Glare Shield and Wireguard to mounting
points on housing as shown below.
STEP 2:
Insert two of the provided spacers between the wireguard
clip and the Visor or Glare Shield.
STEP 3:
Secure Wireguard to housing using the provided slotted hex
head 10
-
24 x
5/8”
screws using 27 in
-
lbs torque.
Note: Wireguard can be mounted over Visor or Glare Shield.
When nesting wireguard and Visor or Glare Shield together use
the longer
5/8”
screws that are provided with the Wireguard.
