SIGNIFY 704964 Скачать руководство пользователя

Страница: 5 / 24

AFTER SALES SUPPORT

1300 777 137

MODEL: EA2085 PRODUCT CODE: 704964 03/2021

RETAIN FOR FUTURE USE

Read this manual thoroughly before first use, even if you are familiar with this type of product. The
safety precautions enclosed herein reduce the risk of fire; electric shock and injury when correctly
adhere to. Please keep this user manual in a safe place along with your purchase receipt, warranty
card and carton for future reference. If applicable, pass these instructions and packaging on to the
next owner of the product. Always follow basic safety precautions and accident prevention measure
when using an electrical product.

1. Read all instructions before using the Night Vision Device.

2. The Night Vision Device is not intended for use by persons with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the product by a person responsible for their safety.

3. Do not use the Night Vision Device for anything other than its intended use.

4. Do not immerse the Night Vision Device in water or any other liquids.

5. Repairs to any electrical equipment should only be performed by qualified personnel. Improper

repairs may place the user at serious risk and will void the warranty.

6. Do not use the Night Vision Device if they have been dropped or damaged in any way. Contact

our After Sales Support Line on 1300 137 777 for further advice.

7. This product is not a toy. Keep the Night Vision Device out of reach of children.

8. This product is not user-serviceable. Contact with high voltage components may cause a risk of

electric shock, therefore do not attempt to open the cover of the Night Vision Device.

9. The manufacturer and retailer are not responsible for any eventual damages caused by improper

or faulty use.

10. Do not place the Night Vision Device near a hot burner (gas or electric), other heat emitting

sources or open flames.

11. The Night Vision Device is intended for private use and not suitable for commercial purposes.

12. Only use batteries with voltage that corresponds to the data on the rating plate of the Night Vision

Device.

13. Never touch the Night Vision Device with wet or damp hands.

14. Do not use the Night Vision Device in damp rooms or in the rain, if avoidable.

15. Do not place the Night Vision Device such that there is a risk of it falling into a tub or sink.

16. Ensure that children not push objects into the housing or eye relief of the Night Vision Device.

17. Insert the batteries observing the correct polarity (+/-). Failure to properly align the battery polarity

can cause personal injury and/or property damage.

General Information and

Safety Instructions

Содержание 704964

























Результаты поиска

Содержание 704964

Отзывы:

Похожие инструкции для 704964

Бренды по названию

Популярные бренды

SIGNIFY 704964, Инструкция по эксплуатации

Результаты поиска

Содержание 704964

Отзывы:

Похожие инструкции для 704964

Бренды по названию

Популярные бренды