Camera Pairing
The system comes with camera(s) that have already been paired. These cameras will communicate with
the receiver once powered on.
The pairing function assigns each camera to a different channel on the wireless receiver (up to 4
cameras), and is necessary for configuring additional cameras.
NOTE: It is highly recommended to pair the cameras to the receiver before permanently mounting the
cameras.
1. Power on the receiver by connecting it to power outlet with supplied 9V power adaptor.
2. Power on the camera by connecting it to power outlet with supplied 9V power adaptor.
3. Press the
Menu
button on the receiver or remote controller.
Navigate to the
Pairing
menu option by pressing the
▼▲◄►
buttons on the remote controller or on the receiver. Press the
Enter
or
OK
button to enter the pairing operation.
4. Select a channel by pressing the UP and DOWN
▼▲
buttons
on the remote controller or on the receiver. Press the
Enter
or
OK
button to confirm the selection.
5. A message will be displayed on the screen.
The receiver will count down from 30~0 – you must press the
Pair
button on the camera during this time to successfully pair
the camera.
If the button on the camera is not pressed, the receiver will
return to the view screen, and no pairing will take place.
6. Press the
Pair
button on the back of the camera.
Once the camera has been paired, it will be immediately
viewable on the TV or monitor.
12
