Signature UPHD3080ST, Руководство пользователя, Страница: 9 / 16

9 MAINTENANCE
MAINTENANCE
Care and Cleaning
WARNINg
To avoid the risk of fire, electric shock or
personal injury:
•
Turn off power to the hood at the circuit breaker
panel or fuse box before cleaning.
•
Clean the hood only in the manner specified.
•
Use only the types of cleaning solutions
specified in this manual.
•
Thoroughly dry the filter(s) immediately after
cleaning.
•
Turn off the cooktop or range and make sure
that the appliance and range hood are cool
before cleaning.
•
To avoid damage to the fan, do not reinstall
damaged filters.
CAUTION
•
Always wipe stainless steel (silver colored)
surfaces with the grain. To prevent scratching,
do not use abrasive cleaners or scrubbers on
stainless steel or glass surfaces.
Proper cleaning is necessary to ensure safe operation
and maintain hood performance and appearance. The
frequency of cleaning should be adjusted according
to the type and amount of cooking. Best results will
be achieved by cleaning soiled components as soon
as possible.
Cleaning Stainless Steel Surfaces
Clean stainless steel surfaces with a mild solution
of detergent or dishwashing soap and warm water.
Rinse and dry with a soft, lint-free cloth.
You may also use Stainless Steel Cleaner. Follow the
directions on the package.
Cleaning the Light Lens
Use a mild glass cleaner to remove smudges on
the light fixture lens. You can also clean it with Cook
Top Cleaning Creme. Follow the directions on the
package.
Cleaning the Filter(s)
Clean the filter a minimum of every two months. To
help remind you to clean the filter(s), the CLEAN
FILTER
light will come on after 50 hours of fan
operation. See page 8 for instructions on how to reset
the light.
To Remove the Filter(s):
The filter(s)
1
are located on the bottom of the hood,
directly above the cooking surface.
1
Hold the filter in place with one hand and push
back on the release lever
2
with the other.
2
1
2
While pushing back on the release lever, lower
the filter out of the hood. On hoods with more
than one filter, remove and clean all of the filters.
To Clean the Filter(s):
Hand wash the filter(s) in hot water with a mild
detergent solution or dishwashing soap. Or place
filters in an automatic dishwasher. Dry the filter(s)
completely before reinstalling.
To Reinstall the Filter(s):
1
Insert tabs on the end of the filter opposite the
release lever into the slots toward the back of
the hood (above the hood rim). The release lever
must be facing down.
2
Push back on the release lever while sliding the
free end of the filter into the filter opening.
3
Release the lever.